spec no: dsaa6030 rev no: v.5 date: nov/21/2005 page: 1 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu package dimensions & internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. surface mount display features 0.4inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package: 400pcs/reel. rohs compliant. p/n: kpsa04 - 104 super bright red description the super bright red source color devices are made with gallium aluminum arsenide red light emitting diode. 4 .com u datasheet
spec no: dsaa6030 rev no: v.5 date: nov/21/2005 page: 2 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu selection guid e part no. dice lens type iv (ucd) @ 10 ma min. typ. kpsa04 - 104 super bright red (gaalas) white diffused 8000 27500 common anode, rt. hand decimal. description electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. parameter super bright red units power dissipation 100 mw dc forward current 30 ma peak forward current [1] 155 ma reverse voltage 5 v operating/storage temperature - 40c to +85c symbol parameter device typ. max. test conditions units peak peak wavelength super bright red 660 nm i f =20ma d dominant wavelength super bright red 640 nm i f =20ma ? 1/2 spectral line half - width super bright red 20 nm i f =20ma c capacitance super bright red 45 pf v f =0v;f=1mhz v f forward voltage super bright red 1.85 2.5 v i f =20ma i r reverse current super bright red 10 ua v r = 5v 4 .com u datasheet
spec no: dsaa6030 rev no: v.5 date: nov/21/2005 page: 3 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu super bright red kpsa04 - 104 remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity/ luminous flux: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. 4 .com u datasheet
spec no: dsaa6030 rev no: v.5 date: nov/21/2005 page: 4 of 4 approved: j. lu checked: joe lee drawn: w.j.zhu recommended soldering pattern (units : mm ) tape specifications (units : mm ) kpsa04 - 104 4 .com u datasheet
|
